A.60 library(ugraphs): Graph manipulation library

author

- R.A.O'Keefe
- Vitor Santos Costa
- Jan Wielemaker

license

BSD-2 or Artistic 2.0

The S-representation of a graph is a list of (vertex-neighbours) pairs, where the pairs are in standard order (as produced by keysort) and the neighbours of each vertex are also in standard order (as produced by sort). This form is convenient for many calculations.

A new UGraph from raw data can be created using vertices_edges_to_ugraph/3.

Adapted to support some of the functionality of the SICStus ugraphs library by Vitor Santos Costa.

Ported from YAP 5.0.1 to SWI-Prolog by Jan Wielemaker.

vertices(+Graph, -Vertices)

Unify Vertices with all vertices appearing in Graph. Example:

?- vertices([1-[3,5],2-[4],3-[],4-[5],5-[]], L).
L = [1, 2, 3, 4, 5]

[det]vertices_edges_to_ugraph(+Vertices:list, +Edges:pairs, -UGraph)

Create a UGraph from Vertices and Edges. UGraph must unify with the corresponding S-representation. Note that vertices that do not appear in any of the Edges appear in UGraph as Vertice-[]. The set of vertices in UGraph is the union of Vertices and all vertices that appear in the Edges pairs.

?- vertices_edges_to_ugraph([],[1-3,2-4,4-5,1-5], L).
L = [1-[3,5], 2-[4], 3-[], 4-[5], 5-[]]

In this case all vertices are defined implicitly. The next example shows three unconnected vertices:

?- vertices_edges_to_ugraph([1,2,6,7,8],[1-3,2-4,4-5,1-5], L).
L = [1-[3,5], 2-[4], 3-[], 4-[5], 5-[], 6-[], 7-[], 8-[]]

add_vertices(+Graph, +Vertices, -NewGraph)

Unify NewGraph with a new graph obtained by adding the list of Vertices to Graph. Example:

?- add_vertices([1-[3,5],2-[]], [0,1,2,9], NG).
NG = [0-[], 1-[3,5], 2-[], 9-[]]

[det]del_vertices(+Graph, +Vertices, -NewGraph)

Unify NewGraph with a new graph obtained by deleting the list of Vertices and all the edges that start from or go to a vertex in Vertices to the Graph. Example:

?- del_vertices([1-[3,5],2-[4],3-[],4-[5],5-[],6-[],7-[2,6],8-[]],
                [2,1],
                NL).
NL = [3-[],4-[5],5-[],6-[],7-[6],8-[]]

Compatibility

Upto 5.6.48 the argument order was (+Vertices, +Graph, -NewGraph). Both YAP and SWI-Prolog have changed the argument order for compatibility with recent SICStus as well as consistency with del_edges/3.

add_edges(+Graph, +Edges, -NewGraph)

Unify NewGraph with a new graph obtained by adding the list of Edges to Graph. Example:

?- add_edges([1-[3,5],2-[4],3-[],4-[5],
              5-[],6-[],7-[],8-[]],
             [1-6,2-3,3-2,5-7,3-2,4-5],
             NL).
NL = [1-[3,5,6], 2-[3,4], 3-[2], 4-[5],
      5-[7], 6-[], 7-[], 8-[]]

ugraph_union(+Graph1, +Graph2, -NewGraph)

NewGraph is the union of Graph1 and Graph2. Example:

?- ugraph_union([1-[2],2-[3]],[2-[4],3-[1,2,4]],L).
L = [1-[2], 2-[3,4], 3-[1,2,4]]

del_edges(+Graph, +Edges, -NewGraph)

Unify NewGraph with a new graph obtained by removing the list of Edges from Graph. Notice that no vertices are deleted. Example:

?- del_edges([1-[3,5],2-[4],3-[],4-[5],5-[],6-[],7-[],8-[]],
             [1-6,2-3,3-2,5-7,3-2,4-5,1-3],
             NL).
NL = [1-[5],2-[4],3-[],4-[],5-[],6-[],7-[],8-[]]

edges(+Graph, -Edges)

Unify Edges with all edges appearing in Graph. Example:

?- edges([1-[3,5],2-[4],3-[],4-[5],5-[]], L).
L = [1-3, 1-5, 2-4, 4-5]

transitive_closure(+Graph, -Closure)

Generate the graph Closure as the transitive closure of Graph. Example:

?- transitive_closure([1-[2,3],2-[4,5],4-[6]],L).
L = [1-[2,3,4,5,6], 2-[4,5,6], 4-[6]]

[det]transpose_ugraph(Graph, NewGraph)

Unify NewGraph with a new graph obtained from Graph by replacing all edges of the form V1-V2 by edges of the form V2-V1. The cost is O(|V|*log(|V|)). Notice that an undirected graph is its own transpose. Example:

?- transpose([1-[3,5],2-[4],3-[],4-[5],
              5-[],6-[],7-[],8-[]], NL).
NL = [1-[],2-[],3-[1],4-[2],5-[1,4],6-[],7-[],8-[]]

Compatibility

This predicate used to be known as transpose/2. Following SICStus 4, we reserve transpose/2 for matrix transposition and renamed ugraph transposition to transpose_ugraph/2.

compose(+LeftGraph, +RightGraph, -NewGraph)

Compose NewGraph by connecting the drains of LeftGraph to the sources of RightGraph. Example:

?- compose([1-[2],2-[3]],[2-[4],3-[1,2,4]],L).
L = [1-[4], 2-[1,2,4], 3-[]]

[semidet]ugraph_layers(Graph, -Layers)

[semidet]top_sort(+Graph, -Sorted)

Sort vertices topologically. Layers is a list of lists of vertices where there are no edges from a layer to an earlier layer. The predicate top_sort/2 flattens the layers using append/2.

These predicates fail if Graph is cyclic. If Graph is not connected, the sub-graphs are individually sorted, where the root of each subgraph is in the first layer, the nodes connected to the roots in the second, etc.

?- top_sort([1-[2], 2-[3], 3-[]], L).
L = [1, 2, 3]

Compatibility

- The original version of this library provided top_sort/3 as a difference list version of top_sort/2. We removed this because the argument order was non-standard. Fixing causes hard to debug compatibility issues while we expect top_sort/3 was rarely used. A backward compatible top_sort/3 can be defined as

top_sort(Graph, Tail, Sorted) :-
    top_sort(Graph, Sorted0),
    append(Sorted0, Tail, Sorted).

The original version returned all vertices in a layer in reverse order. The current one returns them in standard order of terms, i.e., each layer is an ordered set.
- ugraph_layers/2 is a SWI-Prolog specific addition to this library.

[det]neighbors(+Vertex, +Graph, -Neigbours)

[det]neighbours(+Vertex, +Graph, -Neigbours)

Neigbours is a sorted list of the neighbours of Vertex in Graph. Example:

?- neighbours(4,[1-[3,5],2-[4],3-[],
                 4-[1,2,7,5],5-[],6-[],7-[],8-[]], NL).
NL = [1,2,7,5]

[det]connect_ugraph(+UGraphIn, -Start, -UGraphOut)

Adds Start as an additional vertex that is connected to all vertices in UGraphIn. This can be used to create an topological sort for a not connected graph. Start is before any vertex in UGraphIn in the standard order of terms. No vertex in UGraphIn can be a variable.

Can be used to order a not-connected graph as follows:

top_sort_unconnected(Graph, Vertices) :-
    (   top_sort(Graph, Vertices)
    ->  true
    ;   connect_ugraph(Graph, Start, Connected),
        top_sort(Connected, Ordered0),
        Ordered0 = [Start|Vertices]
    ).

complement(+UGraphIn, -UGraphOut)

UGraphOut is a ugraph with an edge between all vertices that are not connected in UGraphIn and all edges from UGraphIn removed. Example:

?- complement([1-[3,5],2-[4],3-[],
               4-[1,2,7,5],5-[],6-[],7-[],8-[]], NL).
NL = [1-[2,4,6,7,8],2-[1,3,5,6,7,8],3-[1,2,4,5,6,7,8],
      4-[3,5,6,8],5-[1,2,3,4,6,7,8],6-[1,2,3,4,5,7,8],
      7-[1,2,3,4,5,6,8],8-[1,2,3,4,5,6,7]]

To be done

Simple two-step algorithm. You could be smarter, I suppose.

reachable(+Vertex, +UGraph, -Vertices)

True when Vertices is an ordered set of vertices reachable in UGraph, including Vertex. Example:

?- reachable(1,[1-[3,5],2-[4],3-[],4-[5],5-[]],V).
V = [1, 3, 5]