---

Notes on supported backend Prolog compilers Last updated on November 10, 2024

This file is part of Logtalk https://logtalk.org/ SPDX-FileCopyrightText: 1998-2024 Paulo Moura <pmoura@logtalk.org> SPDX-License-Identifier: Apache-2.0

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

This file contains some notes about the adapter files provided. The folder unsupported contains adapter files for Prolog compilers that are not yet or no longer officially supported.

If you improve or correct some of these files, or write new ones for other Prolog compilers, please send me a copy. It is simply not feasible to individually test Logtalk under all possible combinations of compatible Prolog versions and operating-system versions.

As a general rule, always try to use the latest version of your Prolog compiler of choice. For Prolog compilers with long release cycles, this may require use of development versions. Most Prolog compilers are moving towards better compatibility with de facto and official standards and thus improved Logtalk compatibility. Also, visit the issue tracker on the Logtalk development website and check for any known Prolog compiler bugs that break Logtalk functionality.

For details on how to integrate Logtalk with specific Prolog compilers, see the files in the integration directory of the Logtalk distribution.

The adapter files may include hacks for missing official and de facto Prolog standard built-in predicates. These hacks aim only to fulfill the minimal requirements of the Logtalk compiler and runtime and are not intended as a full replacement for missing functionality.

Top-level interpreter shorthands

The adapter files define shorthands to often used Logtalk built-in predicates such as logtalk_load/1 and logtalk_make/1 including:

[123, 42, 125]

shorthand for logtalk_make(all); reloads all modified Logtalk source files since last loaded

[123, 33, 125]

shorthand for logtalk_make(clean); deletes (cuts) all intermediate files generated by the compilation of Logtalk source files

[123, 70, 105, 108, 101, 125]

shorthand for logtalk_load(File); compiles and loads a single Logtalk source file (using default flags)

[123, 70, 105, 108, 101, 49, 44, 32, 70, 105, 108, 101, 50, 44, 32, 46, 46, 46, 125]

shorthand for logtalk_load([File1, File2, ...]); compiles and loads several Logtalk source files (using default flags)

Note that these shorthands should only be used for iterative development at the top-level interpreter. They are not part of the Logtalk language specification and can be commented out in case of conflict with backend Prolog compiler features or third-party libraries. See the documentation of the compilation and loading predicates for a full list and details on all available shorthands.

Optional features support per backend Prolog compiler

Some Logtalk features are optional and require compatible support for specific (and sometimes not yet standard) features by the backend Prolog compilers. The following table summarizes the availability of these features:

Compiler	Tabling	Coinduction	Unicode	Engines	Threads	Unbound Ints	Clause Refs
B-Prolog	yes	no	no	no	no	no	no
Ciao Prolog	yes	no	no	no	no	no	yes
CxProlog	no	partial	yes	no	no	no	no
ECLiPSe	no	partial	no	yes	partial	yes	no
GNU Prolog	no	no	no	no	no	no	no
JIProlog	no	no	yes	no	no	no	no
Quintus Prolog	no	no	no	no	no	no	yes
SICStus Prolog	no	yes	yes	no	no	yes	yes
SWI-Prolog	yes	yes	yes	yes	yes	yes	yes
Tau Prolog	no	no	yes	no	no	no	no
Trealla Prolog	no	no	yes	yes	yes	yes	yes
XSB	yes	no	no	no	no	no	no
XVM	no	yes	yes	no	no	yes	yes
YAP	yes	yes	yes	no	no	yes	yes

A value of "yes" means at least minimal support (i.e. some limitations may be present and a recent version of the Prolog system may be required). A value of "no" may simply mean that the backend Prolog compiler either does not provide a compatible implementation of the required features or that the implementation is too buggy to be used. For "partial" values, see the Prolog system notes.

Support for these features (with the exception of unbound integer arithmetic) can be tested using the tabling, coinduction, unicode, engines, and threads Logtalk flags. For some systems, such as YAP, support for some features may depend on the options used when the system was compiled. Some other systems, such as ECLiPSe and Trealla Prolog, only recently implemented features such as threads. Thus, the best practice, when possible and reliable, is to test for a feature instead of simply testing for a Prolog backend.

Support for unbound integer arithmetic can be checked using the bounded Prolog flag. This feature is not strictly required by the compiler/runtime but it's necessary for some libraries such as cbor.

template adapter file

template.pl

If an adapter file for your favorite Prolog is not available, use this file as a template for writing one. For each predicate in the file, check if it is built-in in your Prolog, available in a library, or if you can write a better definition.

B-Prolog 8.1 and later versions

b.pl

Experimental. Bugs and limitations on atom representation result in silent failures when loading libraries and tools (including lgtunit).

Note that this adapter file redefines the B-Prolog (::)/2 finite-domain built-in predicate (you may use the alternative in/2 built-in predicate instead).

Some B-Prolog built-in predicates (e.g. set_to_list/2 or (@=)/2) are not core predicates and can be redefined by the user. The predicate predicate_property/2 does not return the property built_in for these predicates. The solution is to encapsulate calls to these predicates within objects and categories using the Logtalk {}/1 control construct.

You may need to increase the sizes of the code areas on the integration scripts if you run into out-of-memory errors with complex applications.

Matching clauses and action rules are currently not supported.

On Windows, the environment variable BPDIR must be defined and pointing to the B-Prolog installation directory for the installer to detect it.

Ciao Prolog 1.22.0 and later versions

ciao.pl

Experimental. Joint work with the Ciao Prolog developer José Morales. One known issue is that most ISO Prolog standard and de facto standard predicates are not built-in predicates but library predicates. The internal predicate that checks predicate properties (defined in the adapter file) tries to workaround this issue for those predicates but the solution is fragile. There are also several standards compliance issues, notably with multifile predicates, that trigger errors with some tools and examples. These issues are expected to be solved soon. For the best experience, use the latest Ciao Prolog git version.

The first run of the ciaolgt integration script on POSIX systems may require the use of sudo.

CxProlog 0.98.1 or later versions

cx.pl

Developed and tested with the help of the CxProlog author, Artur Miguel Dias.

Due to the long release cycle of CxProlog, you may need to use its development version if the recommended version is not yet available as a stable release.

ECLiPSe 6.1#143 or later versions

eclipse.pl

There is a clash between Logtalk and ECLiPSe regarding the (::)/2 operator. You may still use the (::)/2 operator defined on the ECLiPSe constraint solver libraries by using explicit module qualification by writing `{library:(Var::Domain)}` (replace library by the actual library name; the {}/1 control construct allows you to bypass the Logtalk compiler).

ECLiPSe defines an alias in_set_range/2 for (::)/2 that can be used to avoid conflicts with Logtalk (::)/2 message sending operator.

Adopted from an adapter file written and tested with help of Taner Bilgic for Logtalk 1.x.

With this Prolog compiler, avoid reloading Logtalk source files defining dynamic predicates. Due to the semantics of the ECLiPSe built-in predicate compile/1, new clauses for dynamic predicates are appended to the old ones instead of replacing them.

The Logtalk flag prolog_compiler is not usable due to lack of ECLiPSe built-in predicates for separate compilation and loading. To generate `.eco` files when compiling Logtalk source files, set the Logtalk clean flag to off and add the option output:eco to the Logtalk prolog_loader flag.

ECLiPSe 7.0.25 and later versions multi-threading and engines support provide enough support for Logtalk threaded engines. But other Logtalk multi-threading features cannot currently be supported due to missing mutex predicates and missing thread creation options.

See the scripts/embedding/eclipse directory for a sample shell script that can help in pre-compiling Logtalk and Logtalk applications.

GNU Prolog 1.4.5 and later versions

gnu.pl

GNU Prolog supports the ISO Prolog standard. No problems expected. The adapter file sets the strict_iso flag to off. This is recommended but not required to support Logtalk.

See the scripts/embedding/gprolog directory for a sample shell script that can generate e.g. a new Prolog top-level that embeds Logtalk and optionally a Logtalk application.

JIProlog 4.1.7.1 and later versions

ji.pl

Written with the help of Ugo Chirico, JIProlog author (but if you find any Logtalk problem please report it to me).

See the scripts/embedding/jiprolog directory for a sample shell script for embedding Logtalk and optionally a Logtalk application. The script documentation also explains how to generate JAR files with pre-compiled Logtalk applications.

Quintus Prolog 3.3~3.5

quintus.pl

Experimental. Quintus Prolog is still maintained but (apparently) no longer developed and thus it lacks compliance with current official and de facto standards. Notably, the open/4 and read_term/2-3 built-in predicates use a different argument order and there are also significant differences in arithmetic functions support. This adapter file copes with some of these issues using the dialect-level goal-expansion mechanism.

The original version of this adapter file was written and tested with help of a friend of mine, Paulo Urbano, for a previous version. Adopted for the current release using version 3.5 for Windows for testing.

SICStus Prolog 4.1.0 and later versions

sicstus.pl

Adapter file for SICStus Prolog. Use of the latest SICStus Prolog version is recommended due to improved standards compliance. No problems expected. Please report any problem found (with a solution if possible).

See the scripts/embedding/sicstus directory for a sample shell script that can help in pre-compiling Logtalk and Logtalk applications.

SWI-Prolog 6.6.0 and later versions

swi.pl
swihooks.pl

No problems expected. Please report any problem found (with a solution if possible).

To improve the integration between Logtalk and SWI-Prolog, the file swihooks.pl allows loading of Logtalk source files using SWI-Prolog load_files/2 and consult/1 predicates and adds support for the edit/1 and make/0 predicates, the XPCE profiler, and the XPCE graphical tracer. The profiler and tracer also require specific Logtalk startup settings (see the settings-sample.lgt file for details). Note, however, that in the case of syntax errors in a Logtalk source file, the make/0 predicate will not detect the fixed file as no intermediate Prolog file was generated in the first loading attempt (use instead the logtalk_make/0-1 predicates in this case).

The swihooks.pl file includes experimental and commented out code for writing stack trace for errors generated from top-level message sending calls. To try it, copy the code to your Logtalk settings file that is loaded at startup.

The adapter file may set the iso SWI-Prolog flag to true. This setting may improve compatibility of Logtalk code across different backend Prolog compilers buy may also cause compatibility problems with some SWI-Prolog libraries. Comment out the corresponding set_prolog_flag/2 directive if necessary.

For using XPCE from Logtalk, see the xpce example in the Logtalk distribution.

With multi-threading support turned on, you may get a harmless message when halting the system regarding threads that wouldn't die: you can suppress the message on POSIX systems by using `% swilgt 2> /dev/null`.

The definition of the predicate {}/1 at the end of the adapter files conflicts with e.g. the clpq and clpr SWI-Prolog constraint libraries. The {}/1 predicate is used in Logtalk as a shortcut to the logtalk_load/1 and logtalk_make/1 built-in predicates. Comment out the definition in the adapter file if necessary. Note that Logtalk also defines a {}/1 control construct but this is only used within objects and categories.

Logtalk doesn't rely on the SWI-Prolog auto-loading mechanism for library predicates. Calls of these predicates within objects and categories must be explicitly qualified or implicit qualified by listing the predicates in use_module/2 directives. You may also set the Logtalk portability, and unknown_predicates compiler flags to warning in order to detect unqualified calls to library predicates. All the module libraries must be loaded prior to compilation of object and categories containing calls to the library predicates.

macOS users of the SWI-Prolog.app application, must add the definitions for the LOGTALKHOME and LOGTALKUSER environment variables to their `~/.plrc or ~/.swiplrc or .config/swi-prolog/init.pl` init files (as macOS GUI applications don't inherit shell environment variable values):

:- if((
        current_prolog_flag(home,HOME),
        sub_atom(HOME,_,_,0,'SWI-Prolog.app/Contents/swipl')
)).

        :- setenv('LOGTALKHOME', '/opt/local/share/logtalk').
        :- setenv('LOGTALKUSER', '/Users/pmoura/logtalk').
        :- ['$LOGTALKHOME/integration/logtalk_swi.pl'].

:- endif.

The conditional compilation block allows automatically loading Logtalk at startup of the the SWI-Prolog.app macOS GUI application while still be able to use the shell integration script (swilgt).

To load Logtalk on-demand when using the SWI-Prolog.app application, you can use the goal:

?- ['$LOGTALKHOME/integration/logtalk_swi.pl'].

In alternative, you can install the Logtalk pack for SWI-Prolog by typing:

?- pack_install(logtalk).

After, you can load Logtalk on-demand by typing:

?- use_module(library(logtalk)).

The pack alternative is handy for deployment but not ideal for development as it implicitly assumes a single user and the files are buried inside the packs directory (e.g. `.local/share/swi-prolog/pack/`).

The Logtalk flag prolog_compiler is not usable due to lack of SWI-Prolog built-in predicates for separate compilation and loading. To generate `.qlf` files when compiling Logtalk source files, set the Logtalk clean flag to off and add the option qcompile(auto) to the Logtalk flag prolog_loader.

To use the SWI-Prolog graphical tracer for debugging Logtalk source code, see the settings-sample.lgt file for the necessary settings. Note that those settings result in large intermediate Prolog files as in addition to the information collected for Logtalk own reflection features, all file terms are decorated with additional source file location information for integration with the SWI-Prolog own development tools. Use the gtrace/0-1 predicates to start the tracer. For example:

?- gtrace(foo::bar).

You can also use the gspy/1 predicate to spy a Logtalk predicate specified as `Entity::Functor/Arity` using the graphical tracer.

See the scripts/embedding/swipl directory for a sample shell script that can help in generating QLF files from Logtalk and optionally a Logtalk application. The script documentation also explains how to generate saved states that include Logtalk applications.

Messages sent from modules (including user) use static binding when the Logtalk optimize flag is turned on before compiling the module files.

Tau Prolog 0.3.2 and later versions

tau.pl

Experimental. Joint work with the Tau Prolog developers. For faster startups after the first one when using the provided taulgt integration script, edit the core/core.pl file and change the compiler flag clean(on) to clean(off) for loading the built-in entities (look into the end of the file for the predicate that loads them). There are also some standards compliance issues and parser bugs that may trigger errors with some tools and examples. These issues are expected to be solved soon. For the best experience, use the latest Tau Prolog git version.

Trealla Prolog 2.59.21 and later versions

trealla.pl

Joint work with the Trealla Prolog developer, Andrew Davison.

XSB 3.8.0 and later versions

xsb.pl

XSB generates intermediate files (with a `.xwam` extension) when compiling Prolog source files (thus including the Logtalk core files). Thus, you must either install Logtalk on a location where you have write access or perform the first run of the integration scripts from a user with the required privileges (e.g. using sudo on POSIX systems or choosing Run as administrator on Windows systems).

Due to the relative long release cycle of XSB, you may need to use its development version if the recommended version is not yet available as a stable release.

Know multifile predicate issues in XSB 3.8.0 and earlier versions have now been fixed in the current XSB development version; use it if possible.

The definition of the as operator used in Logtalk when declaring predicate (or non-terminal) aliases conflicts with the definition of this operator in XSB due to the use of a different priority. XSB uses this operator within table/1 directives to represent tabling options. In practice there's only a conflict when, in the same table/1 directive, more than one predicate is declared as tabled and/or when more than one tabling option is specified. This cases are not common, however. The workaround is to use parenthesis around the predicates and/or the tabling options.

To generate `.xwam` files from Logtalk source files, set the prolog_compiler flag to the list of options that will be passed to the XSB compile/2 built-in predicate and use either the built-in predicates logtalk_compile/1-2 or the built-in predicates logtalk_load/1-2 with the clean flag turned off.

See the scripts/embedding/xsb directory for a sample shell script that can help in pre-compiling Logtalk.

The first run of the xsblgt integration script on POSIX systems may require the use of sudo. The first run of the Logtalk - XSB integration shortcut on Windows may need to be run as administrator.

XVM 10.0.0 and later versions

xvm.pl

Coinduction support requires setting the unify_applies_occurs_check to true. This can be accomplished e.g. by using the `--enable-occurs-check` command-line option:

$ xvmlgt --enable-occurs-check

YAP 6.3.4 and later versions

yap.pl
yaphooks.pl

The adapter file may set the flag language to iso, but that is only recommended and should not be needed to run Logtalk as some YAP libraries may not be compatible with this flag setting. Comment out the corresponding set_prolog_flag/2 directive if necessary.

The yaphooks.pl file defines YAP hook predicates for improving the integration between Logtalk and YAP.

Note that YAP can be compiled with or without support for features like tabling or threads.

See the scripts/embedding/yap directory for a sample shell script that can help in pre-compiling Logtalk and Logtalk applications. The script documentation also explains how to generated saved states that include Logtalk applications.

Messages sent from modules (including user) use static binding when the Logtalk optimize flag is turned on before compiling the module files.