10.1 Creating and destroying Prolog threads

thread_create(:Goal, -Id)

Shorthand for thread_create(Goal, Id, []). See thread_create/3.

thread_create(:Goal, -Id, +Options)

Create a new Prolog thread (and underlying operating system thread) and start it by executing Goal. If the thread is created successfully, the thread identifier of the created thread is unified to Id.

Id is the alias name if the option alias(name) is given. Otherwise it is a blob of type thread. The anonymous blobs are subject to atom garbage collection. If a thread handle is garbage collected and the thread is not detached, it is joined if it has already terminated (see thread_join/2) and detached otherwise (see thread_detach/1).^{199Up to version 7.3.23, anonymous thread handles were integers. Using integers did not allow for safe checking of the thread's status as the thread may have died and the handle may have been reused and did not allow for garbage collection to take care of forgotten threads.} The thread identifier blobs are printed as <thread>(I,Ptr), where I is the internal thread identifier and Ptr is the unique address of the identifier. The I is accepted as input argument for all thread APIs that accept a thread identifier for convenient interaction from the toplevel. See also thread_property/2.

Options is a list of options. The currently defined options are below. Stack size options can also take the value inf or infinite, which is mapped to the maximum stack size supported by the platform.

affinity(+CpuSet)

Specify that the thread should only run on the specified CPUs (cores). CpuSet is a list of integers between 0 (zero) and the known number of CPUs (see cpu_count). If CpuSet is empty a domain_error is raised. Referring to CPUs equal to or higher than the known number of CPUs returns an existence_error.

This option is currently implemented for systems that provide pthread_attr_setaffinity_np(). The option is silently ignored on other systems.^{bugThere is currently no way to discover whether this option is supported.}

alias(AliasName)

Associate an‘alias name’with the thread. This name may be used to refer to the thread and remains valid until the thread is joined (see thread_join/2). If the OS supports it (e.g., Linux), the operating system thread is named as well.

at_exit(:AtExit)

Register AtExit as using thread_at_exit/1 before entering the thread goal. Unlike calling thread_at_exit/1 as part of the normal Goal, this ensures the AtExit is called. Using thread_at_exit/1, the thread may be signalled or run out of resources before thread_at_exit/1 is reached. See thread_at_exit/1 for details.

debug(+Bool)

Enable/disable debugging the new thread. If false (default true), the new thread is created with the property debug(false) and debugging is disabled before the new thread is started. The thread debugging predicates such as tspy/1 and tdebug/0 do not signal threads with the debug property set to false.^{200Currently, the flag is only used as a hint for the various debugging primitives, i.e., the system does not really enforce that the target thread stays in nodebug mode.}

detached(Bool)

If false (default), the thread can be waited for using thread_join/2. thread_join/2 must be called on this thread to reclaim all resources associated with the thread. If true, the system will reclaim all associated resources automatically after the thread finishes. Please note that thread identifiers are freed for reuse after a detached thread finishes or a normal thread has been joined. See also thread_join/2 and thread_detach/1.

If a detached thread dies due to failure or exception of the initial goal, the thread prints a message using print_message/2. If such termination is considered normal, the code must be wrapped using ignore/1 and/or catch/3 to ensure successful completion.

inherit_from(+ThreadId)

Inherit defaults from the given ThreadId instead of the calling thread. This option was added to ensure that the __thread_pool_manager (see thread_create_in_pool/4), which is created lazily, has a predictable state. The following properties are inherited:

• The prompt (see prompt/2)
• The typein module (see module/1)
• The standard streams (user_input, etc.).
• current_input and current_output are bound to user_input and user_output.
• The default encoding (see encoding)
• The default locale (see set_locale/1)
• All prolog flags
• The stack limit (see Prolog flag stack_limit).

queue_max_size(Size)

Enforces a maximum to the number of terms in the input queue. See message_queue_create/2 with the max_size(o)ption for details.

stack_limit(Bytes)

Set the size limit for the Prolog stacks. See the Prolog flag stack_limit. The default is inherited from the calling thread or the thread specified using inherit_from(ThreadId).

c_stack(Bytes)

Set the limit to which the C stack of this thread may grow. The default, minimum and maximum values are system-dependent. The value is rounded up to the system page size and SWI-Prolog enforces a minimum of 64 K-bytes.

The Goal argument is copied to the new Prolog engine. This implies that further instantiation of this term in either thread does not have consequences for the other thread: Prolog threads do not share data from their stacks.

thread_self(-Id)

Get the Prolog thread identifier of the running thread. If the thread has an alias, the alias name is returned.

thread_join(+Id)

Calls thread_join/2 and succeeds if thread Id terminated with success. Otherwise the exception error(thread_error(Id, Status), _) is raised, where Status is the status as returned by thread_join/2.

thread_join(+Id, -Status)

Wait for the termination of the thread with the given Id. Then unify the result status of the thread with Status. After this call, Id becomes invalid and all resources associated with the thread are reclaimed. It is not allowed for two threads to join the same thread and the thread being joined cannot be detached (see the detached(true) option for thread_create/3 and thread_detach/1).

A thread that has been completed without thread_join/2 being called on it is partly reclaimed: the Prolog stacks are released and the C thread is destroyed. A small data structure representing the exit status of the thread is retained until thread_join/2 is called on the thread. Defined values for Status are:

true

The goal has been proven successfully.

false

The goal has failed.

exception(Term)

The thread is terminated on an exception. See print_message/2 to turn system exceptions into readable messages.

exited(Term)

The thread is terminated on thread_exit/1 using the argument Term.

Note that the pthread primitive pthread_join() cannot be interrupted. Some systems provide pthread_timedjoin_np(). If this is provided thread_join/2 is implemented as a loop of timed joins with a 0.25 sec timeout while signals are being tested after each timeout. Such systems allow combining thread_join/2 with call_with_time_limit/2 as well as signalling threads blocked in thread_join/2 using thread_signal/2.

thread_alias(+Alias)

Set the alias name of the calling thread to Alias. An error is raised if the calling thread already has an alias or Alias is in use for a thread or message queue.

thread_detach(+Id)

Switch thread into detached state (see detached(Bool) option at thread_create/3) at runtime. Id is the identifier of the thread placed in detached state. This may be the result of thread_self/1.

One of the possible applications is to simplify debugging. Threads that are created as detached leave no traces if they crash. For non-detached threads the status can be inspected using thread_property/2. Threads nobody is waiting for may be created normally and detach themselves just before completion. This way they leave no traces on normal completion and their reason for failure can be inspected.

thread_exit(+Term)

Terminates the thread immediately, leaving exited(Term) as result state for thread_join/2. If the thread has the attribute detached(true) it terminates, but its exit status cannot be retrieved using thread_join/2, making the value of Term irrelevant. The Prolog stacks and C thread are reclaimed.

The current implementation is based on the reserved unwind(thread_exit(Term)) exception. This implies that, unlike the previous implementation that was based on the C pthread_exit() function, the implementation is safe from the Prolog point of view. However, it is limited by the semantics of the unwind exceptions. See section 4.10.1 for details.

This predicate raises a permission_error if it is known that the thread cannot handle this case.

thread_initialization(:Goal)

Run Goal when thread is started. This predicate is similar to initialization/1, but is intended for initialization operations of the runtime stacks, such as setting global variables as described in section 4.33. Goal is run on four occasions: at the call to this predicate, after loading a saved state, on starting a new thread and on creating a Prolog engine through the C interface. On loading a saved state, Goal is executed after running the initialization/1 hooks.

thread_at_exit(:Goal)

Run Goal just before releasing the thread resources. This is to be compared to at_halt/1, but only for the current thread. These hooks are run regardless of why the execution of the thread has been completed. When these hooks are run, the return code is already available through thread_property/2 using the result of thread_self/1 as thread identifier. Note that there are two scenarios for using exit hooks. Using thread_at_exit/1 is typically used if the thread creates a side-effect that must be reverted if the thread dies. Another scenario is where the creator of the thread wants to be informed when the thread ends. That cannot be guaranteed by means of thread_at_exit/1 because it is possible that the thread cannot be created or dies almost instantly due to a signal or resource error. The at_exit(Goal) option of thread_create/3 is designed to deal with this scenario.

The Goal is executed with signal processing disabled. This avoids that e.g., thread_signal(Thread, abort) kills the exit handler rather than the thread in the case the body of Thread has just finished when the signal arrives.

thread_setconcurrency(-Old, +New)

Determine the concurrency of the process, which is defined as the maximum number of concurrently active threads.‘Active’here means they are using CPU time. This option is provided if the thread implementation provides pthread_setconcurrency(). Solaris is a typical example of this family. On other systems this predicate unifies Old to 0 (zero) and succeeds silently.

thread_affinity(+ThreadID, -Current, +New)

True when Current is unified with the current thread affinity and the thread affinity is successfully set to New. The thread affinity specifies the set of CPUs on which this thread is allowed to run. The affinity is represented as a list of non-negative integers. See also the option affinity(+Affinity) of thread_create/3.

This predicate is only present if this functionality can be supported and has been ported to the target operating system. Currently, only Linux support is provided.